CAD/CAE/CFD/CAO/HPC news 8 May 2015

The CAD Market Returns to Growth; Reaches $8 Billion in 2014

Jon Peddie Research (JPR), a market watcher that tracks the design software market, has some good news. The CAD market is growing again — to the tune of $8 billion in 2014.

The company writes, “Jon Peddie Research estimates the CAD software market to be an $8 billion market with 5.15 million annual users. We expect the market to grow to $8.7 billion in 2017 at a CAGR of 4%. The CAD market has been marked by a modest growth rate for decades, but that doesn’t mean the industry is not changing. We have seen significant changes in the years following the recession in 2009. As is typical in all recessions the industry has become more efficient, it has tightened in terms of employment, and it is poised for growth in the coming years.

JPR's CAD software revenue

In JPR’s market share breakdown, Autodesk leads the pack at 29%. The rest of the pie is divided by Dassault Systemes (22%), Siemens PLM Software (11%), and PTC (9%).

The landscape appears to be dominated by the usual suspects, but Kathleen Maher, VP and editor-in-chief of JPR’s Tech Watch, said, “We are seeing the industry open up for new players and those new players are bringing new technologies with them. Most dramatically, of course, are the arrivals of Hexagon and Trimble, who are combining metrology with design and documentation to build location-aware CAD processes. Other companies helping change the face of CAD include SpaceClaim, which has been acquired by ANSYS; and GrabCAD, which has been acquired by Stratasys. I might even mention TechSoft, which has translation tools and 3D PDF publishing tools. It’s been tough to shoehorn traditional CAD approaches into complementary market like simulation, analysis, 3D printing, visualization, etc. These companies are tackling those kinds of problems.”

Some notable trends — such as cloud computing, mobile devices, and virtualization — don’t necessarily “move the needle significantly for individual segments of CAD,” according to Maher. But she added, “They are important technologies being incorporated into CAD vendors’ business plans. Take mobile for instance, you’d be hard pressed to find a CAD vendor who does not have complementary tablet apps.”

JPR’s look at the CAD industry encompasses products deployed in architecture and construction in addition to mechanical CAD. Maher observed, “The growth of CAD in regions is heavily influenced by the economic situation in certain regions. So, to put it simply, in those regions where the economy is booming, you’ll find more manufacture, more construction, and therefore more use of CAD tools.” 

Source: via